Road coated core drilling tube Ø ≤ 60 mm. Transparent tube, soft rubber seal base,
with bypass for gel suction, metal clamping system and transparent receptacle with soft
rubber seal.
To be used with EGP CORE gel: 0.8 liters of gel / core.
Gel cartridge EGP310DIAG
Reference: EGP310DIAG-1
Gel cartridge, 310 ml, for sampling. Blue coloring for zone marking.
Asbestos : Our EasyGel Protect® diagnostic solutionsguarantee you a dust <5f / L (limit of the health code public).
This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training.
The solution is suitable for all types of dust: harmful or not (Asbestos / Lead / Silica / Dusts,…).
SPECIFICATIONS
• Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
• Pre-dosed and ready to use product
• Transparent and non-harmful gel
• Sampling method that does not alter laboratory analyzes.
BENEFITS
• Cheap Solution
• Easy to use
• Reproducible operating mode
• Clean Site
• Protection of operators and their environment
• Limitation of handling and risks related to height working
EGP310DIAG-1
Data sheet
- Destination
- Diagnostic
- Conditionnement
- Cartouche de 310 ml
- Gel coloré
- Non
- Quantité minimum
- 12 unités
Gel cartridge, 310 ml, for sampling. Blue coloring for zone marking.
13 other products in the same category:
Tool + Gel bag EGP500DIAG for sampling during coring / sampling operations Ø 25 mm. Associated with our diagnostic gels, it allows the capture and retention at the source of dust (asbestos, lead, silica, etc.), in compliance with regulations.
Capture and retention of fine and ultra-fine particles at source during core drilling/sampling operations as part of diagnosis before work or demolition.
The technique does not require water thanks to the use of our specially developed diagnostic gel.
Gel for impregnation and spraying, in a 5 L container. Consumption : 1 liter of gel per m2.
Gel for impregnation: kit of a spray bottle of 1L and its refill of 5L in flexible container.
Gel for impregnation: kit of a spray bottle of 1L and its refill of 5L in flexible container. Blue coloring for zone marking.
Gel cartridge, 310 ml, for sampling. Blue coloring for zone marking.
Tool for sampling during coring / sampling operations Ø 25 mm. Associated with our diagnostic gels, it allows the capture and retention at the source of dust (asbestos, lead, silica, etc.), in compliance with regulations.
Capture and retention of fine and ultra-fine particles at source during core drilling/sampling operations as part of diagnosis before work or demolition.
The technique does not require water thanks to the use of our specially developed diagnostic gel.
Gel for impregnation and spraying in 1L spray bottle. Blue coloring for zone marking.
Resealable gel bag, 450 ml, for sampling. Blue coloring for zone marking.