Gel bag TRANSEGP250+ for crossing drill of Ø ≤ 14 mm - Rough surfaces
Reference: TRANSEGP250+
Gel bag for crossing drill of Ø ≤ 14 mm. Kit: "EGP inlet and EGP outlet” kit for Ø ≤ 14 mm. For rough surfaces
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
Asbestos : All products in the EGP Drilling range, allow a dust level below the occupaional exposure limit value of 10f/L to be obtained.
This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training.
The solution is suitable for all types of dust: harmful or not (Asbestos / Lead / Silica / Dusts,…).
SPECIFICATIONS
• Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
• Pre-dosed and ready to use product
• Transparent and non-harmful gel
BENEFITS
• Cheap Solution
• Easy to use
• Reproducible operating mode
• Clean Site
• Protection of operators and their environment
• Limitation of handling and risks related to height working
• Product validated by regulations
TRANSEGP250+
Data sheet
- Destination
- Percement traversant
- Diamètre
- Ø ≤ 14 mm
- Surfaces
- Rugueuses
- Conditionnement
- 2 poches à usage unique
- Quantité minimum
- 25 unités
Gel bag for crossing drill of Ø ≤ 14 mm. Kit: "EGP inlet and EGP outlet” kit for Ø ≤ 14 mm. For rough surfaces
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
You might also like
5 other products in the same category:
Gel bag for crossing drill of Ø ≤ 14 mm. Kit: "EGP inlet and EGP outlet” kit for Ø ≤ 14 mm. (EGP250 / EGP250C +).
Surface : to be specify when ordering.
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
Gel bag for drilling Ø ≤ 14mm through rough materials (poured concrete, plaster rendering, fiber cement).
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
Gel bag for drilling Ø ≤ 14mm through smooth materials (paint, wallpaper, tiles, etc.).
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
Gel bag for drilling Ø ≤ 8mm through rough materials (poured concrete, plaster rendering, fiber cement).
Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
Gel bag for drilling Ø ≤ 8mm through smooth materials (paint, wallpaper, tiles, etc.).Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…).