Gel for coring, chiselling, spreading with a spatula (1 container: 5 m² depending on absorption of the support) ... In flexible 5L container.
Kit of gel for impregnation EGPKITIMP
Reference: EGPKITIMP-1
Gel for impregnation: kit of a spray bottle of 1L and its refill of 5L in flexible container.
Capture and retention of all dusts at the source.
The solution is suitable for all types of dust: harmful or not (Asbestos / Lead / Silica / Dusts,…).
Each gel, specifically developed according to its application, allow you to reduce dusting.
This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training.
SPECIFICATIONS
• Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…)
• Pre-dosed and ready to use product
• Transparent and non-harmful gel
• Sampling method that does not alter laboratory analyzes.
BENEFITS
• Cheap Solution
• Easy to use
• Reproducible operating mode
• Clean Site
• Protection of operators and their environment
• Limitation of handling and risks related to height working
EGPKITIMP-1
Data sheet
- Destination
- Imprégnation
- Conditionnement
- Gel coloré
- Non
- Quantité minimum
- A l'unité
Gel for impregnation: kit of a spray bottle of 1L and its refill of 5L in flexible container.
15 other products in the same category:
Gel sheath for sawing, floor and wall. one side glued, 1m length.
Gel for ground detachment: slabs, ... in 5L flexible container.
Gel for impregnation and spraying, in a 20 L bucket. Consumption : 1 liter of gel per m3.
Gel for ground detachment: slabs, ... in 10L flexible container.
Gel for impregnation and spraying in 1L spray bottle. Blue coloring for zone marking.
Gel for ground detachment: slabs, ... in 20L bucket.
Gel Cartridge 310 ml for different operations: chiseling, screwing - unscrewing, seal removal, paint scrapping, roof work... Without water supply.
Gel for coring, chiselling, spreading with a spatula (1 bucket: 10 to 20 m² depending on absorption of the support) ... In a 10 L bucket. To be used with our coring tools.
Gel sheath for sawing, floor and wall. one side glued, 2m length.
Gel for coring, chiselling, spreading with a spatula (1 container: 5 m² depending on absorption of the support) ... In flexible 10L container.
Gel for impregnation and spraying, in a 5 L container. Consumption : 1 liter of gel per m2.
Gel for impregnation: kit of a spray bottle of 1L and its refill of 5L in flexible container. Blue coloring for zone marking.